Skip to main content
ExLibris
  • Subscribe by RSS
    • Back
    Aleph
    Ex Libris Knowledge Center

    X-Server: Z308-VERIFICATION can not be empty when TAB-BOR-ID-VER-NEEDED is "Y"

    1. Last updated
    2. Save as PDF
    • Article Type: General
    • Product: Aleph
    • Product Version: 21

    Problem Symptoms:
    * Installed Minor Release Aleph 21.1
    * Update / Create new patrons via X-Server is not possible
    Error 0504 : Z308-VERIFICATION can not be empty when TAB-BOR-ID-VER-NEEDED is "Y"

    The request contains these z308-lines
    <z308>
    <record-action>I</record-action>
    <z308-key-data>210971nnnn</z308-key-data>
    <z308-verification>nnnn</z308-verification>
    <z308-key-type>01</z308-key-type>
    </z308>
    <z308>
    <record-action>I</record-action>
    <z308-key-data>210971nnnn</z308-key-data>
    <z308-verification>nnnn</z308-verification>
    <z308-key-type>03</z308-key-type>
    </z308>
    <z308>
    <record-action>I</record-action>
    <z308-key-data>210971nnnn -- cf40</z308-key-data>
    <z308-verification>nnnn</z308-verification>
    <z308-key-type>09</z308-key-type></z308>
    </patron-record>
    </p-file-20>

    ./xxx50/tab/tab100 has
    DEFAULT-BOR-VERIFY-1=N
    DEFAULT-BOR-VERIFY-2=N

    Cause:
    ./xxx50/tab/tab100 has DEFAULT-BOR-VERIFY-n=N

    Resolution:
    Change DEFAULT-BOR-VERIFY-n in ./xxx50/tab/tab100 to =K

    ./xxx50/tab/tab100
    DEFAULT-BOR-VERIFY-1=K
    DEFAULT-BOR-VERIFY-2=K

    Additional Information

    from header of ./xxx50/tab/
    ! Y = create a default field value, using last-bor-verify-1
    ! counter from z52 (UTIL G/2)
    ! K = the same as 'N', except in the P-FILE-20, where empty
    ! verification field in the input file is populated with the z308-key-data.
    !

    Category: X-server (500)

    • Article last edited: 10/8/2013