Skip to main content
ExLibris
  • Subscribe by RSS
    • Back
    Aleph
    Ex Libris Knowledge Center

    p_file_20: 0504 error adding z308 type 00

    1. Last updated
    2. Save as PDF
    • Article Type: General
    • Product: Aleph
    • Product Version: 18.01

    Description:
    Getting lots of errors while trying to run our PLIF updates:

    System is adding z308 type 00.
    Error (b_file_20_chk_edit_record) : Errors in Z308 Record 000001
    Number of Errors = 01
    Error 0504 : Z308-VERIFICATION can not be empty when TAB-BOR-ID-VER-NEEDED is "Y"

    System is adding z308 type 00.
    Error (b_file_20_chk_edit_record) : Errors in Z308 Record 000002
    Number of Errors = 01
    Error 0504 : Z308-VERIFICATION can not be empty when TAB-BOR-ID-VER-NEEDED is "Y"

    Etc.

    Resolution:
    As noted in KB 16384-3267, for the type 00, the generation of the z308_verification in b_file_20_merge_z308 occurs only when the TAB100-DEFAULT-BOR-VERIFY-1 is set to "Y" (or "K").... "N" does not generate a z308_verification.

    The abc50 tab100 has: DEFAULT-BOR-VERIFY-1=N.

    If you want it to use the util g/2 last-bor-verify-1 value, specify "Y".

    If you want it to use the z308-key-data -- as it was previous to v18 rc 1575, specify "K".

    "K" is the simplest. Change the abc50 tab100

    DEFAULT-BOR-VERIFY-1=N

    to:
    DEFAULT-BOR-VERIFY-1=K

    Note: If the error occurs for a type 01 (barcode) rather than a 00, see KB 16384-18626.

    • Article last edited: 10/8/2013