Skip to main content
ExLibris
  • Subscribe by RSS
  • Ex Libris Knowledge Center

    ue_01: Execution error : .../create_z0101_aut.gnt

    • Article Type: General
    • Product: Aleph
    • Product Version: 15.2

    Description:
    ue_01 keeps stopping. The $data_scratch/run_e_01.log has the following error message:

    /exlibris1/15_2/u52_5/xxx01/tab/tab_aut.
    Execution error : file '/exlibris/15_2/a52_5/aleph/exe/create_z0101_aut.gnt'.
    error code: 114, pc=0, call=138, seg=0.

    Resolution:
    This error can result from an incorrect Col. 3 in the $data_tab/tab_aut:

    1. In one case, the column was aligned incorrectly: there were two spaces between the "1" in col. 2 and the "MHI10" in col.3. (There should be only one.) Moving "MHI10" one character to the left and restarting ue_01 corrected the problem.

    2. In another case, column 3 had a bad library name, just "ATA ". Correcting it to "ATA10" and restarting ue_01 corrected the problem.

    3. In another case, column 3 was correctly formatted but the library did not exist in $aleph_libs.

    Additional Information

    ue_01, tab_aut


    • Article last edited: 10/8/2013
    • Was this article helpful?