Skip to main content
ExLibris
  • Subscribe by RSS
  • Ex Libris Knowledge Center

    Courses

    Translatable
    For additional configuration tasks related to course reserves, see:

    Configuring Processing Departments

    To configure processing departments, you must have one of the following roles:
    • General System Administrator
    • Fulfillment Administrator
    Processing departments are the internal/staff units that are responsible for managing course reading lists and citations. This field is mandatory when creating a course (see Adding a Course), but it is (currently) for informational purposes only.
    Each Alma institution or library can include many processing departments. Each processing department that you define at the institution level is available to the libraries within the institution.
    You configure processing departments from the Department List page (Configuration Menu > Fulfillment > Courses > Processing Departments).
    processing_departments_ux.png
    Department List Page
    This page is the same as that used for configuring digitization departments. For instructions on adding, editing, and deleting processing departments, see Configuring Digitization Departments.

    Configuring Academic Departments

    To configure academic departments, you must have one of the following roles:
    • General System Administrator
    • Fulfillment Administrator
    Alma lets you define academic departments with which you can associate courses (see Adding a Course). For example, you can create an academic department for Exact Sciences. You can then associate a particular course (for example, Introduction to Chemistry) with this academic department. Note that you can define academic departments at the institution level only.
    Academic departments may be either enabled or disabled. By default, all new academic departments are enabled. The defined academic departments appear in all Academic department drop-down lists in Alma, in the same order in which they are listed on the Code Table page on which you define them. Only enabled academic departments appear in the Academic department drop-down lists.
    You configure academic departments from the Course Faculties code table (Configuration Menu > Fulfillment > Courses > Academic Departments). For more information about code tables, see Code Tables.
    academic_departments_ux.png
    Course Faculties Page – Academic Departments
    Most of the details are system-generated and cannot be edited.
    You can add, enable or disable departments, or select one as the default selected department in the drop-down list.
    You can import academic departments information using the Import tab in the Course Faculties code table, as follows:
    To import academic departments information:
    1. Export the file using Export > Excel (see Export to Excel).
    2. Make your changes and save the file. Note that there should be no duplicate lines in the Excel file.
    3. Select Import on the relevant page. 
    4. In the File field, select Browse to locate the file on your computer.
    5. Select the file you wish to upload, then select Open.
    6. When the document is loaded, select Upload File

    Configuring Additional Reading List Citation Statuses

    To configure reading list citation statuses, you must have one of the following roles:
    • General System Administrator
    • Fulfillment Administrator
    While managing reading list citations, you can assign a status to the citation (see Managing Citations). Alma comes with a number of predefined citation statuses (see Reading List and Citation Statuses in the Leganto Administration Guide). You can configure additional citation statuses. Note that you cannot remove Alma's predefined statuses.
    You define additional citation statuses on the Additional Reading List Citation Statuses code table (Configuration Menu > Fulfillment > Courses > Additional Reading List Citation Statuses). For more information about code tables, see Code Tables.
    reading_list_statuses_ux.png
    Additional Reading List Citation Statuses Page
    You can add, edit, and delete additional citation statuses on this page. You cannot edit or delete any system-defined statuses (which do not appear on this table). You can select a status as the default selected status in the drop-down list.

    Configuring Automatic Purchasing Requests from Citations

    You can configure rules to automatically create purchase requests for citations based on criteria associated with the citation, reading list, and/or course. These rules are run whenever a citation is saved (note that citation status is one of the criteria that can be checked). For more information on purchase requests, see Purchase Requests.
    The rules are created on the Purchase Workflow Rules List page (Configuration Menu > Fulfillment > Courses > Citation Processing Rules). For more information about rules tables, see Rules Tables.
    purchasing_workflow_rules_list_ux.png
    Purchase Workflow Rules List Page
    Rules are checked from top to bottom and only the first matching rule applies. If no rules match, a purchase request is not created. You can enable and disable rules, change their order, edit, duplicate, or delete them. For more information about working with rules, in general, see Configuring Digitization and Copyright Rules.
    The new purchase request is "created by" the user that added or edited the citation.
    A purchase request is not created if:
    • A purchase request already exists for the citation's resource
    • The reading list is not associated with a course
    • No rules match the criteria
    To create an automatic citation processing rule:
    1. On the Purchase Workflow Rules List page, select Add Rule. The Purchase Workflow Setup page appears.
      purchase_workflow_rule_setup_ux.png
      Purchase Workflow Rule Editor Page
    2. Enter a name (mandatory) and description for the rule.
    3. Enter the criteria for the rule and select Add Parameter (repeat as required; all criteria must match for the rule to trigger). Criteria are composed of the following elements:
      • Name - Select one of:
        • Academic Department - Whether the course has one or none of the selected academic departments
        • Available in Electronic - Whether the citation's resource is already available electronically
        • Citation Status - Whether the citation's status matches one or none of the selected statuses
          A citation's status can only trigger a rule when the citation is created; the rule will not trigger if the citation's status is edited manually.
        • Citation Tag - Whether the citation's tag matches one or none of the selected types. To use these options, tags must be defined.
        • Citation Type - Whether the citation's material type matches one or none of the selected types
        • In Repository - Whether the citation's resource is already in Alma's repository
        • Item to Student Ratio - Whether the percentage of requested items / the number of participants is higher, lower, equal to, or not equal to a certain value. The value must be between 0 and 1. For example, 0.1 means 1 copy per 10 students.
        • Number of Students - Whether the number of students is higher, lower, equal to, or not equal to a certain value
        • Reading List Status - Whether the reading list's status matches one or none of the selected statuses
        • Total Copies - Whether the total copies requested is higher, lower, equal to, or not equal to a certain value
      • Operator - Select the relevant comparison operator, depending on the criteria selected for Name.
      • Value - Select one or more values, or enter a value, for the criteria, depending on the criteria selected for Name.
    4. After entering one or more criteria, select in Request Format whether the requested purchase should be physical or electronic.
    5. When you are done, select Save.

    Adding Citation Tags

    Use the DSC system tags to create rules to auto-generate a purchase request:

    • Digitisation Approved
    • Digitisation Rejected
    • Digitisation Removed
    • Digitisation Sent
    • Digitisation In Progress

    Configuring Course Terms

    To configure additional reading list statuses, you must have one of the following roles:
    • General System Administrator
    • Fulfillment Administrator
    Course terms appear in the Terms list field when adding a new course on the Manage Course Information page. For more information, see Managing Courses.
    You manage course terms on the Course Terms code table page (Configuration Menu > Fulfillment > Courses > Course Terms). It is not possible to add or delete course terms; however, you can customize the course term descriptions and enable/disable the terms. For more information about code tables, see Code Tables.
    course_terms_ux.png
    Course Terms Page

    Configuring Citation Attribute Types

    To configure citation attribute types, you must have one of the following roles:
    • General System Administrator
    • Fulfillment Administrator
    When working with citations, you can add attributes to the citations (see Attaching Citation Attributes to Citations). Each attribute has a name and a type.
    You can configure additional attribute types that you will then be able to map to attributes on the Citation Attributes Types Code Table page (Configuration Menu > Fulfillment > Courses > Citation Attributes Types). For more information about code tables, see Code Tables.
    citation_attribute_types_ux.png
    Citations Attributes Types Page
    The Default value field is not relevant in this table.
    Alma comes configured out-of-the-box with the citation attribute type Requested_format. Up to five citation attributes can be added per citation attribute type.

    Configuring Citation Attributes

    To configure citation attributes, you must have one of the following roles:
    • General System Administrator
    • Fulfillment Administrator
    When working with citations, you can add attributes to the citations (see Attaching Citation Attributes to Citations). Each attribute has a name and a type.
    You can configure additional attributes for citations on the Citation Attributes Code Table page (Configuration Menu > Fulfillment > Courses > Citation Attributes). For more information about code tables, see Code Tables. Alma comes configured out-of-the-box with the citation attributes Book, Audio, CD, and DVD.
    citation_attributes_ux.png
    Citations Attributes Page
    The Default value field is not relevant in this table.
    Up to five citation attributes can be added per citation attribute type.

    Mapping Citation Attributes to Citation Attributes Types

    To configure citation attributes to citation attributes types, you must have one of the following roles:
    • General System Administrator
    • Fulfillment Administrator
    When working with citations, you can add attributes to the citations (see Attaching Citation Attributes to Citations). Each attribute has a name and a type.
    Before you use citation attributes, you must map citation attributes to citation attribute types on the Citations Attributes To Citations Attributes Types mapping table (Configuration Menu > Fulfillment > Courses > Citation Attributes to Citation Attributes Types). For more information about working with mapping tables, see Mapping Tables.
    citation_type_to_attribute_mapping_ux.png
    Citations Attributes To Citations Attributes Types Page
    Alma comes configured out-of-the-box with the Book, Audio, CD, and DVD attributes mapped to the Requested_format attribute type.
    You can add additional attribute types and attributes, and map them to each other, as needed. Up to five citation attributes can be added per citation attribute type.
    To map citation attribute types to citation attributes:
    1. On the Citations Attributes To Citations Attributes Types mapping table page, select Add Row.
    2. In the Attribute field, select a citation attribute.
    3. In the Attribute type field, select a citation attribute type to which you want to assign to the selected attribute.
    4. Select Add Row. The mapped values appear in the Mapping Table Rows table. The attribute is mapped to the indicated attribute type.
    5. When you are done, select Customize.

    Configuring Citation Matching Criteria

    You can configure the fields that Alma uses to match newly-entered non-repository citations to Alma inventory. For books (with ISBNs), Alma tries to match to the local Alma bibliographic record. For articles (with ISSNs), Alma tries to match using the OpenURL link resolver (with DOI). Alma tries to match all enabled fields (AND). See Managing a Citation's Attachment to an Inventory Item.
    You configure the fields on the Match by Fields code table (Configuration Menu > Fulfillment > Courses > Locate Citation by Fields). For more information about code tables, see Code Tables.
    The citation match fields configuration.
    Match by Fields Page
    To add or remove fields as required matching criteria:
    Select the gray or yellow checkmarks in the rows. Select Customize when you are done. The display order and default value features on this page are not enabled.
    Originating system ID is the ID that the record had in the previous system before the record was migrated to Alma. The field appears if it was added during the migration process (for more information, contact Ex Libris customer support) and can be added manually when editing a citation (see Adding Citations to a Reading List)..

    Configuring Citation and Section Tags

    Sections (and section tags) are only relevant for Leganto.
    In addition to attributes, citations and reading list sections can use an expanded tagging system.
    • Librarians can configure any amount of tags for both citations and sections in Alma.
    • Public citation and section tags appear to patrons in Leganto. Instructors and librarians can view Instructor-Library tags in Leganto and Alma. Only librarians can view Library-Internal tags in Leganto and Alma. Instructors can view Library-External tags in Leganto and Alma, but they cannot add or remove them.
      A fourth type of tag, Internal, is created by Ex Libris and cannot be managed by customers. These tags are typically added to a section or citation as a result of a Leganto or Alma feature and used to indicate some kind of process status for that feature. They are visible to instructors in Leganto and to librarians in Leganto and Alma. Customers cannot add, edit, manage, or remove these tags.
    • Librarians can view and remove citation tags to/from citations in Alma. The tags assigned to citations appear in each citation section on the Edit Reading List page (see Managing Citations).
    • Tag descriptions must be at least three characters long.
    • Tags that are not mapped to a specific tag type can be added to citations using the Questions feature but cannot be added manually (see Adding citation tags).
    • Defining tags is a two-step process:
      1. Define the tag in the Tags table.
      2. Configure the tags as citation/section and as public/instructor-library/library-internal/library-external on the Tag Mapping table.
    To define tags:
    1. To define public tags, open the Tags code table (Configuration Menu > Fulfillment > Courses > Tags). For more information about code tables, see Code Tables.

      tags_ux.png

      Public Tags Page

      Make any required changes. Note that the Default Value field currently has no effect. When you are done, select Customize to save your changes.

    2. Open the Tags to Tag Mapping table (Configuration Menu > Fulfillment > Courses > Tag Mapping). For more information about working with mapping tables, see Mapping Tables.

      tags_to_tag_level_and_visibility_mapping_table.png

      Tags to Tags Level and Visibility Page

      Make any required changes. When you are done, select Save to save your changes.

      • Changing this table does not affect any existing tags already attached to citations.
      • (Leganto only) The order that tags appear in the drop-down list in Leganto is determined by the Leganto customer parameter tag_sorting (Configuration Menu > Leganto > General > Settings). The options are:
        • group (default) – Sort in the following orders: all public tags, followed by (librarians only) all library-internal tags, followed by all library-instructor tags. Within each group, the order is determined by the order in the Tags code table.
        • table – Sort only by the order in the Tags code table.

    Configuring Reading List Subjects

    You can view the out-of-the-box subjects available for reading lists on the Reading List Subject Tags code table (Configuration Menu > Fulfillment > Courses > List Subjects). You can add new subjects on the Additional Reading List Subject Tags code table (Configuration Menu > Fulfillment > Courses > Additional List Subjects). For more information about code tables, see Code Tables.

    reading_list_subject_tags.png

    Reading List Subject Tags Code Table

    reading_list_subject_tags.png

    Additional Reading List Subject Tags Code Table

    On the Reading List Subject Tags code table, you can enable, disable, or change the names of the subjects. The available subjects are as follows:

    Aeronautics Aesthetics Agriculture Anarchism Angling
    Animal Husbandry Animal Science Anthropology Aquaculture Arboriculture
    Archaeology Architecture Archives Art Astronautics
    Astronomy Atlas Bahaism Bible Bibliography
    Biography Biology Books Botanic Botany
    Bridges Buddhism Building Construction Canon Law Cartography
    Chemical Technology Chemistry Christianity Civil Engineering Classical Studies
    Colonization Commerce Communication Communism Community
    Criminology Decorative Art Demography Dentistry Dermatology
    Design Diplomatics Doctrinal Theology Drawing Eclectic Medicine
    Economic History Economic Theory Education Education Theory Electrical Engineering
    Electronics Emigration Engineering Environmental Science Environmental Technology
    Epigraphy Ethics Family Finance Fisheries
    Folklore Forestry Genealogy Geography Geology
    Gynecology and Obstetrics Heraldry Highway Engineering History History of Civilization
    History of Education Homeopathy Horticulture Human Anatomy Human Ecology
    Hunting Hydraulic Engineering Illustration Industry Information Resources
    Inscriptions International Law International Migration International Relations Islam
    Judaism Labor Law Leisure Libraries
    Linguistic Literature Literature on Music Local Government Logic
    Manners and Customs Map Marriage Mathematical Geography Mathematics
    Medicine Metallurgy Microbiology Mining Engineering Modern Languages
    Motor Vehicles Municipal Government Music Mythology Natural History
    Nuclear Engineering Numismatics Nursing Ocean Engineering Oceanography
    Ophthalmology Otorhinolaryngology Painting Paleography Pathology
    Pediatrics Pharmacology Philology Philosophy Physical Geography
    Physics Physiology Plant Breeding Plant Propagation Political Science
    Political Theory Practical Theology Print Media Psychology Public Welfare
    Race Rationalism Recreation Religions Religious Law
    Sanitary Engineering Science Sculpture Seals Silviculture
    Social Class Social History Socialism Social Pathology Social Problem
    Social Reform Social Science Society Sociology Statistics
    Surgery Technical Chronology Technology Theosophy Therapeutics
    Transportation Visual Art Women and Sexuality Writing Zoology

    On the Additional Reading List Subject Tags code table, you can add, delete, enable, disable, or change the names of new subjects.

    • Alma does not check if the codes you enter on the Additional Reading List Subject Tags code table are unique, both within the table and with the codes in the Reading List Subject Tags code table. If you enter a duplicate code, the results may be unexpected.
    • If you remove a subject from the Additional Reading List Subject Tags code table that was assigned to a reading list, the subject remains assigned to the reading list until you remove it from the reading list.

    Configuring Citation Material Types

    You can view the secondary material types available for citations on the Reading List Citation Secondary Types code table (Configuration Menu > Fulfillment > Courses > Citation Material Type). For more information about code tables, see Code Tables.
    This list is not the same as the one described in Configuring Physical Item Material Type Descriptions.
    reading_list_citation_secondary_types_ux.png
    Reading List Citation Secondary Types Page
    The types are:
    Abstract Anthology Archive Article Artwork Audio Recording
    Blog Book Book Chapter Book Extract Case Case Study
    CD Computer Program Conference Conference Paper Database Dissertation
    Document DVD E-book Electronic Article Eoffprint Government Document
    Grant Image Interview Journal Legal Document Legislation
    Letter LibGuides Manuscripts Map Music Newspaper
    Newspaper Article Note * Other Pamphlet Patent Poem
    Presentation Reference Entry Research Dataset Review Score Series
    Standards Statistical Data Set Technical Report Text Resource Thesis Transcript
    Video Website Working Paper      
    * Citations of type Note (citations whose material type is set to Note) are added by instructors in Leganto. They are used to provide information to the students who are viewing the reading list, and do not need to be fulfilled by the library staff. You can only edit or delete them in Alma.

    Configuring Reading List Statuses

    To configure reading list statuses, you must have one of the following roles:
    • General System Administrator
    • Fulfillment Administrator
    While managing a reading list, you can assign a status to the reading list (see Managing Reading Lists). Alma comes with a number of predefined reading list statuses (see Reading List and Citation Statuses in the Leganto Administration Guide). You can change the name of the predefined statuses and you can add additional reading list statuses. Note that you cannot remove Alma's predefined statuses.
    You configure reading list statuses on the Reading List Statuses code table (Configuration Menu > Fulfillment > Courses > Reading List Statuses). For more information about code tables, see Code Tables.
    reading_list_statuses_ux.png
    Reading List Statuses Page
    You can change the names of the reading list statuses on this page. You cannot edit or delete any system-defined statuses.
    You add additional reading list statuses on the Additional Reading List Statuses code table (Configuration Menu > Fulfillment > Courses > Additional Reading List Statuses).
    additional_reading_list_statuses_ux.png
    Additional Reading List Statuses Page
    You can add, edit, and delete additional reading list statuses on this page. The default radio button has no effect on this page.
    • Alma does not check if the codes you enter on the Additional Reading List Statuses code table are unique, both within the table and with the codes in the Reading List Statuses code table. If you enter a duplicate code, the results may be unexpected.
    • If you remove a subject from the Additional Reading List Statuses code table that was assigned to a reading list, the status remains assigned to the reading list until you remove it from the reading list.

    Mapping Bibliographic Record Fields to Citation Fields

    The fields in a citation are copied from bibliographic records when a) you create a citation from a repository record or b) a resource locate is successfully performed (manually or automatically) on the citation, thereby connecting the citation to a repository record.

    Also see the parameters reading_list_auto_locate_citation_upon_creation, resource_locate_multiple_matches, and resource_locate_multiple_matches_priority in Configuring Other Settings. If you are using Leganto, you can configure whether the values in the bibliographic record overlays or merges with the values already in the citation; see Configuring Repository Locate Workflow.

    The BIB to Citation Normalization feature now supports both MARC 21 and UNIMARC formats.

    Mapping fields is done using normalization rules, which contain a condition and one or more actions to be applied to records. The syntax for these rules is described in Normalization Rule Syntax. For a quick view of the default mapping, see Repository Fields Used to Overwrite Citation Fields.

    In the Bibliographic Mapping Rules page (Configuration Menu > Fulfillment > Courses > Bibliographic Mapping Rules), you can select to edit a set of test rules that you can then test on the Test BIB to Citation Normalization page (Configuration Menu > Fulfillment > Courses > Test BIB to Citation Normalization). When you are happy with the results, copy your changes to the production rules on the Bibliographic Mapping Rules page (and optionally test them again on the Test BIB to Citation Normalization page).

    Bibliographic_Mapping_Rules.png

    Bibliographic Mapping Rules Page

    Test_BIB_to_Citation_Normalization_page.png

    Test BIB to Citation Normalization Page
    To configure the mapping that determines how the data in a bibliographic record is copied to the citation:
    1. In the Bibliographic Mapping Rules page, select Customize in the row actions list for the test rules (Test - dslr to convert marc to course reserve citation / Test - dslr to convert UNIMARC to course reserve citation). An edit page appears.

      Bibliographic_Mapping_Rules_edit.png

      Bibliographic Mapping Rules Edit Page
      On this page, do not change the filename or file key. In the content, do not change any lines in the file above the file rule (from the first line until the line global CitationRecord targetObj).
    2. Add, edit, or delete rules in the content as required. For assistance, see Normalization Rule Syntax. When you are done, select Customize.
    3. On the Test BIB to Citation Normalization page:
      1. Enter the MMS ID of a record to test.
      2. Select the test normalization rule Test - dslr to convert marc to course reserve citation / Test - dslr to convert UNIMARC to course reserve citation.
      3. Select Run Test. The source fields of the bibliographic record appear in the Source Record pane, and the citation fields derived from the record appear in the Normalized Record pane.

        Test_BIB_to_Citation_Normalization_page_after_run.png

        Test BIB to Citation Normalization Page, After Run
    4. If everything appears correctly, return to the Bibliographic Mapping Rules page, copy the changes from the test rules to the production rules (Prod - dslr to convert marc to course reserve citation / Prod - dslr to convert UNIMARC to course reserve citation) and save the changes.
    5. Optionally ensure that the rules work correctly by testing the production rules on the Test BIB to Citation Normalization page.