Skip to main content
ExLibris
  • Subscribe by RSS
  • Ex Libris Knowledge Center

    Subject Areas

    This section describes each of the subject areas provided with the out-of-the-box dashboard.

    Primo Action Usage

    Using the Primo Action Usage subject area, you can create reports that help to answer the following types of business questions:
    • How many times did users invoke a certain action in Primo (such as basic versus advanced searches)?
    • How often were users signed-in when they invoked a certain action?
    • On average how many times are specific actions invoked in a single session?
    The Primo Action Usage subject area contains many fields used to create reports associated with usage. Refer to the following sections for more information on each field.
    Primo Action Usage Fields

    Action Usage

    The Action Usage table is the fact table that stores information about the actions taken by end users in Primo.
    Action Usage
    The following table lists the fields provided by the Action Usage fact table:
    Action Usage Fact Table
    Field Description
    Actions
    A measurement field that tracks the number of times an action was taken.
    Sessions
    A measurement field that tracks the number of sessions in which an action was taken.
    Sessions are counted only one per action. For example if the user ran two searches in the same session – the session will be counted only once.
    Note that if you total the number of sessions in the Actions table it will be greater than the number of sessions for the same period in the Sessions table – since the same session will be counted more than once.
    Signed-in
    A measurement field that tracks the number of times an action was taken from a user who was signed-in.
    On Campus
    A measurement field that tracks the number of times an action was taken from a user who was on campus.
    This field is available with the November 2015 release.
    First Page Results - Primo
    A measurement field that tracks the average percentage of local Primo records that display on the first page of search results.
    This field is available with the November 2015 release.
    First Page Results - Primo Central
    A measurement field that tracks the average percentage of Primo Central records that display on the first page of search results.
    This field is available with the November 2015 release.
    First Page Results - EBSCO
    A measurement field that tracks the average percentage of EBSCO records that display on the first page of search results (using the EBSCO deep search adaptor).
    This field is available with the November 2015 release.
    First Page Results - WorldCat
    A measurement field that tracks the average percentage of WorldCat records that display on the first page of search results (using the WorldCat deep search adaptor).
    This field is available with the November 2015 release.
    First Page Results - Other
    A measurement field that tracks the average percentage of records from other sources (such as locally-defined deep search adaptors or MetaLib) that display on the first page of search results.
    This field is available with the November 2015 release.
    Primo View
    An attribute field that stores the view in which the action was performed.
    This attribute is available with the July 2015 release. Actions that predate this release will not have this attribute.
    Active Tab
    An attribute field that stores the tab in which the action was performed.
    This attribute is available with the November 2015 release. Actions that predate this release will not have this attribute.
    Search Scope Type
    A search attribute field that indicates which type of search scope was used in the search. A search scope type is provided for search and results list actions. For all other actions, the search scope type will have a null value.
    The Search scope type has the following values:
    • Local – A search performed on the local repository. For example, it will not include articles from the Primo Central index. Some libraries may have a separate tab in Primo that is dedicated to searching the local repository. For example, they may call it University collections.
    • Blended – Any search that includes records from both the local repository and the deep search adaptors (such as Primo Central). For example, some libraries may have one tab in Primo that is used to search all sources.
    • Remote – Any search that includes MetaLib. The search will include MetaLib and may include any of the following repositories: local and deep search adaptors (such as Primo Central).
    • PC/Deep Search – A search that includes only deep search adaptors (such as Primo Central and EBSCO). For example, some libraries may have a separate tab in Primo called Articles that does not include the local and remote repositories.
    The Search Scope Type has been added in the July 2015 release. Actions that predate the installation of this release will not have this attribute.
    User Group
    A search attribute field that indicates the user group of the user. The User Groups for Primo Analytics mapping table defines the user groups that display in the reports. A user's group is determined as follows:
    • If a user has signed in and belongs to a user group, the system will try to map the user group to one of eight user groups defined in the User Groups for Primo Analytics mapping table. If a match is not found, the Not Guest user group is used.
    • If a user has signed in and does not belong to a user group, the Not Guest user group is used.
    • If the user has not signed in, the Guest user group is used.
    For more details, see User Groups for Primo Analytics.
    This attribute has been added in the May 2016 release. Actions that predate the installation of this release will not have this attribute.
    Referrer
    A search attribute field that contains the referrer information (such as Google Scholar, Yahoo, and Primo), which indicates how users are accessing information from the Primo Front End.
    This attribute has been added in the May 2016 release. Actions that predate the installation of this release will not have this attribute.

    Dates

    The Dates table is a dimension table that contains different date ranges and formats. The date dimension is used to limit reports to specific date ranges (such as year, month, week, and day).
    Dates Dimension Table

    Action Types

    The Action Types table is a dimension table with several attributes.
    Action Types Dimensions Table
    The following table lists the attributes contained the Action Types dimension table.
    Action Types
    Field Description
    Action Group
    An attribute field that divides actions into groups.
    See Action Groups and Subgroups for list of Actions groups.
    Action Sub Group
    An attribute field that divides actions into subgroups.
    See Action Groups and Subgroups for list of Action subgroups.
    Action
    An attribute field for the type of action.
    See Action Attributes by Group for a list of actions.
    Actions
    A hierarchal attribute field in which actions are organized into groups and subgroups.
    The following table lists the action groups and their associated subgroups.
    Action Groups and Subgroups
    Group Subgroups
    Search
    The Search group includes all search related actions and contains the following subgroups:
    • Search – all keyword based searches
    • Browse – browse list searches
    • Suggest Search – search from the Suggested search function
    Results List
    The Results List group includes all actions taken on the results list and contains the General subgroup.
    Document
    The Document group includes all actions taken on a specific PNX record and contains the following subgroups:
    • Tab – click a specific tab
    • Get It – click the delivery tab
    • Actions – click an action from the Actions menu
    • Link – click a link from the Details tab
    • Tags & Review – Tags and review related actions
    • eShelf – add to e-Shelf
    • General – other actions
    General Actions
    The General Actions group includes additional actions and contains the General subgroup.
    The following table lists the hierarchal attributes of the actions:
    Action Attributes by Group
    Subgroup Action Description
    Search group:
    Search
    Basic search
    A search invoked from the Basic search box.
    Advanced search
    A search invoked from the Advanced search box.
    AZ list
    A search invoked from an e-Journal A to Z list (Alma).
    Browse
    Browse page
    Users invoked the Browse option.
    Browse authors, Browse subjects, Browse titles, Browse generic call numbers, Browse Dewey call numbers, Browse LC call numbers , Browse SUDOC call numbers, Browse NLM call numbers
    A browse search on a specific type of browse list.
    Browse related records
    Users clicked on an entry in a Browse list to display linked records
    Suggested Search
    Suggested Search – Author
    Suggested Search – Subject
    Users invoked a suggested search.
    This action is tracked from the July 15 release. Previously, searches that were run with Suggested Search were counted as a regular search.
    Search history
    Session Query
    Users invoked a search from saved queries from the session.
    This action is counted from the July 15 release and previously was counted as a regular search.
    Saved Query
    Users invoked a search from their saved queries.
    This action is counted from the July 15 release and previously was counted as a regular search.
    Results List group:
    Sort
    Sort by title, Sort by author, Sort by date, Sort by rank, Sort by popularity, Sort by local
    Users invoked a sort option
    General
    Facet filtering
    Users invoked a facet. For more information on facets, see Primo Facet Usage.
    Remove Facet filtering
    Users removed facet filtering – every facet removed is counted. This action starts tracking from the July 15 release. Previously, it was tracked as selection of a facet.
    Next page
    Users displayed new page in the results list (including using the “Next” option or page number)
    Previous page
    Users displayed a previous page by clicking on the Previous option.
    bX hot articles
    Users displayed bX Hot Articles.
    RSS subscription
    Users requested an RSS subscription
    Expand PC Results (Checked)
    Users invoked the Expand beyond library collections option.
    Data for this action is available starting with the November 2015 release.
    Expand PC Results (Unchecked)
    Users disabled the Expand beyond library collections option.
    Document group:
    Tab
    Reviews tab, Virtual browse tab, Details tab, Recommendations tab, Times cited tab, Locations tab
    Users invoked a record tab. Note that the delivery tabs (View Online/View It and Request/Get It) are included in a separate group.
    Get It
    GetIt Link 1, GetIt Link 2
    Users invoked either the Get It 1 or Get It2 tab.
    Link
    Link to review, Link to request, Link to Finding aid, Native interface, Additional link, Link to times cited, Link to TOC, Link to abstract, Union catalog, openURL, Local link NN, Link to price, Link to source, openURL FT
    Users invoked one of the links in the Details tab. Local links are indicated by Local link and the link number.
    Actions
    Permalink, Remove from eShelf, RefWorks, Delicious, eMail, Print, EndNote Web, RIS Export, Citation
    Users invoked one of the actions from the Actions menu.
    Tags & Reviews
    Add review, Add tag
    Users added a review or a tag.
    eShelf
    Save to eShelf
    Users added a record to the e-Shelf.
    eShelf
    Save to eShelf (Web Service)
    Users added a record to the e-Shelf using a Web service.
    eShelf
    Save to eShelf
    (X-Service)
    Users added a record to the e-Shelf using an X service.
    Lateral Linking
    Lateral Linking - <field/>
    Users invoke a lateral link from the Details tab (Author, Subject or local field).
    External Link
    Permalink
    Users accessed a record full display using a Permalink
    Deep Link
    Users accessed a record full display using a Deep link (for example, from an email).
    General
    Display Versions
    Users invoked a link to display all versions for either a Primo Central or local record.
    Display FRBR Versions
    From the July 2015 release, the system distinguishes between clicking a links to FRBR groups and PC groups.
    Display Primo Central Versions
    From the July 2015 release, the system distinguishes between clicking links to FRBR groups and PC groups.
    Clicking title
    Users clicked a title in the brief results.
    Clicking icon
    Users clicked a thumbnail/icon in the brief results.
    Display full record
    Users invoked the option to open a record in the full page.
    Display more institutions
    Users invoked the Display more institutions option from the Alma Get It tab.
    General Actions group:
    General
    Sign-in
    Users signed in.
    Sign-out
    Users signed out.
    Find database
    Users invoked the Find Database option (MetaLib).
    Go to Journal A-Z List
    Users invoked the Journal A-z List (SFX). Data for this action is available starting with the November 2015 release.
    The use of the Alma A-Z List is recorded as a search action.
    Citation linker
    Users invoked the Citation Linker option.
    Go to eShelf
    Users accessed the e-Shelf. Data for this action is available starting with the November 2015 release.
    Go to eShelf (Deep Link)
    Users accessed the e-Shelf using a deep link. Data for this action is available starting with the November 2015 release.
    Help
    Users clicked the Help link. Data for this action is available starting with the November 2015 release.
    Update Personalized Results Profile
    Users updated their Personalized Results Profiles.
    Remove Personalized Results Profile
    Users removed their Personalized Results Profiles. Data for this action is available starting with the July 2015 release.
    My Account
    Go to My Account
    Users accessed My Account. Data for this action is available starting with the November 2015 release.
    Go to My Account (Deep Link)
    Users accessed My Account using a deep link. Data for this action is available starting with the November 2015 release.
    Loans
    Users accessed the Loans list in My Account. Data for this action is available starting with the November 2015 release.
    Because the Loans list opens by default when accessing My Account, this action is tracked only when users access the Loans list directly.
    Requests
    Users accessed the Requests list in My Account. Data for this action is available starting with the November 2015 release.
    Fines and Fees
    Users accessed the Fines and Fees list in My Account. Data for this action is available starting with the November 2015 release.
    Blocks and Messages
    Users accessed the Blocks and Messages page in My Account. Data for this action is available starting with the November 2015 release.
    Personal Settings
    Users accessed the Personal Settings page in My Account. Data for this action is available starting with the November 2015 release.
    Library Card
    For OPAC via Link environments, users accessed the Library Card in My Account. Data for this action is available starting with the November 2015 release.
    Because the Library Card opens by default when accessing My Account, this action is tracked only when users access the Library Card directly.

    Institutions

    The Institutions table is a dimension table with the following attributes: Primo Institution Code and Institution Name.
    Institutions Dimensions Table

    Primo Facet Usage

    Using the Primo Facet Usage subject area, you can create reports that help to answer the following types of business questions:
    • Which facets are most used?
    • On average how often are facets used in a single session?
    The Primo Facet Usage subject area contains many fields used to create reports associated with facet usage. Refer to the following sections for more information on each field.
    Primo Facet Usage Subject Area

    Facet Usage

    The Facet Usage table is the fact table that stores information about the facets selected by end users in Primo.
    Facet Usage
    The following table lists the fields provided by the Facet Usage fact table:
    Facet Usage Fields
    Field Description
    Facets Selected
    This measurement field tracks the number of times an action was taken.
    Sessions
    This measurement field tracks the number of sessions in which an action was taken.
    Sessions are counted only once per action. For example, if the user selected a facet twice in the same session, the session is counted only once.
    If you total the number of sessions in the Facets table it will be greater than the number of sessions for the same period in the Sessions table – since the same session will be counted more than once.
    Facet Value
    An attribute field that stores the specific facet value that users select in the following cases:
    • Top-Level facet
    • Resource Type facet
    If this attribute is added to a report, nothing will appear for other facets.
    Data for this attribute is available starting with the November 2015 release.
    Primo View
    An attribute field that stores the view in which the action was performed.
    This attribute has been added for the July 2015 release. Actions that predate the installation of this release will not have this attribute.
    Active Tab
    An attribute field that stores the tab in which the facet was selected:
    This attribute has been added for the November 2015 release. Actions that predate the installation of this release will not have this attribute.
    Search Scope Type
    An attribute field that indicates the active search scope while the facet was selected.
    The Search Scope Type has been added in the July 2015 release. Facet selections that predate the installation of this release will not have this attribute.
    The Search scope type has the following values:
    • Local only – Any search on local data only
    • Blended – Any search on local data and Primo Central or a Deep-Search
    • Remote – Any search with MetaLib, including MetaLib with another search engine (e.g. Primo Local or Primo Central or a Deep-search)
    • PC/Deep Search – A search in Primo Central or another Deep Search node. This includes blended deep search nodes (such as Primo Central and EBSCO).
    User Group
    A search attribute field that indicates the user group of the user. The User Groups for Primo Analytics mapping table defines the user groups that display in the reports. A user's group is determined as follows:
    • If a user has signed in and belongs to a user group, the system will try to map the user group to one of eight user groups defined in the User Groups for Primo Analytics mapping table. If a match is not found, the Not Guest user group is used.
    • If a user has signed in and does not belong to a user group, the Not Guest user group is used.
    • If the user has not signed in, the Guest user group is used.
    This attribute has been added in the May 2016 release. Actions that predate the installation of this release will not have this attribute.

    Dates

    The Dates is a dimension table for different date ranges and formats. The date dimension can be used to limit reports to specific date ranges (such as year, month, week, and day).
    Dates Dimension Table

    Facet Types

    The Facet Types table is a dimension table with a single attribute: the type of facet.
    Facet Types
    Field Description
    Facet Type
    The facet type. All out-of-the-box and locally defined facets are included.

    Institutions

    The Institutions table is a dimension table with the following attributes: Primo Institution Code and Institution Name.
    Institutions Dimensions Table

    Primo Popular Searches

    Using the Primo Popular Searches subject area, you may create reports that help to answer the following types of business questions:
    • Which queries are most popular?
    • Are there any trends in popularity of certain topics over time?
    The Primo Popular Searches subject area contains many fields used to create reports associated with popular searches. Refer to the following sections for more information on each field.
    Primo Popular Search Usage

    Popular Searches

    The Popular Searches table is a fact table that stores information about the most popular searches. Popular searches are gathered on a monthly basis. A search is considered popular if it has been performed at least 10 times within a month. Up to 500 popular searches are saved per month. At least 200 searches will be saved even if they are not considered popular. This means that no more than 200 searches will be saved unless there are 200 or more searches with 10 occurrences.
    Popular Searches
    The following table lists the fields provided in the Popular Searches fact table:
    Popular Searches Fields
    Field Description
    Searches
    A measurement field that stores the number of searches for the query.
    Results
    A measurement field that stores the average number of results per search.
    First Page Results - Primo
    A measurement field that tracks the average percentage of local Primo records that display on the first page of search results.
    This field is available with the November 2015 release.
    First Page Results - Primo Central
    A measurement field that tracks the average percentage of Primo Central records that display on the first page of search results.
    This field is available with the November 2015 release.
    First Page Results - EBSCO
    A measurement field that tracks the average percentage of EBSCO records that display on the first page of search results (using the EBSCO deep search adaptor).
    This field is available with the November 2015 release.
    First Page Results - WorldCat
    A measurement field that tracks the average percentage of WorldCat records that display on the first page of search results (using the WorldCat deep search adaptor).
    This field is available with the November 2015 release.
    First Page Results - Other
    A measurement field that tracks the average percentage of records from other sources (such as locally-defined deep search adaptors or MetaLib) that display on the first page of search results.
    This field is available with the November 2015 release.
    Rank
    The rank of the search in terms of number of results.
    This field can useful for sorting purposes.
    Sign-in
    The number of times an action was taken when the user was signed-in.
    On Campus
    A measurement field that tracks the number of times an action was taken from a user who was on campus.
    This field is available with the November 2015 release.
    Primo View
    An attribute field that stores the view in which the action was performed.
    This attribute is available with the July 2015 release. Actions that predate this release will not have this attribute.
    Active Tab
    An attribute field that stores the tab in which the action was performed.
    This attribute is available with the November 2015 release. Actions that predate this release will not have this attribute.
    Search String
    The user’s query.
    User Group
    A search attribute field that indicates the user group of the user. The User Groups for Primo Analytics mapping table defines the user groups that display in the reports. A user's group is determined as follows:
    • If a user has signed in and belongs to a user group, the system will try to map the user group to one of eight user groups defined in the User Groups for Primo Analytics mapping table. If a match is not found, the Not Guest user group is used.
    • If a user has signed in and does not belong to a user group, the Not Guest user group is used.
    • If the user has not signed in, the Guest user group is used.
    This attribute has been added in the May 2016 release. Actions that predate the installation of this release will not have this attribute.

    Dates

    The Dates table is a dimension table used to different date ranges and formats. The dates dimension can be used to limit reports to specific date ranges (such as year, month, week, and day).
    Dates Dimension Table

    Institutions

    The Institutions table is a dimension table with the following attributes: Primo Institution Code and Institution Name.
    Institutions Dimensions Table

    Primo Zero Result Searches

    Using the Zero Results Searches subject area, you may create reports that help to answer the following types of business questions:
    • Which kind of queries result in no results?
    • What kind of errors do end users make in queries that cause no results to be found?
    Data for this subject area is available starting with the July 2015 release.
    The Primo Zero Result Searches subject area contains many fields used to create reports associated with searches that return no results. Refer to the following sections for more information on each field.
    Zero Result Searches Subject Area

    Zero Result Searches

    The Zero Result Search table is a fact table that stores information about searches that had zero results.
    Zero Result Searched Subject Area
    The following table lists the fields provided by the Zero Result Searches fact table:
    Zero Results Searches Fields
    Field Description
    Searches
    The number of searches for the query.
    Signed-in
    A measurement field that tracks the number of times a signed-in user performed a search and received no results.
    On Campus
    A measurement field that tracks the number of times an action was taken from a user who was on campus.
    This field is available with the November 2015 release.
    Primo View
    An attribute field that stores the view in which the action was performed.
    Active Tab
    An attribute field that stores the tab in which the action was performed.
    This attribute is available with the November 2015 release. Actions that predate this release will not have this attribute.
    Search string
    An attribute field that stores the search string that returned no results.
    Search scope
    An attribute field that stores the search scope in which the search was performed when no results were received by the user.
    Search scope type
    An attribute field that stores the active search scope type, which allows the following values:
    • Local only – any search on local data only
    • Blended - any search on local data and Primo Central or a Deep-Search
    • Remote - any search with MetaLib, including MetaLib with another search engine (e.g. Primo Local or Primo Central or a Deep-search)
    • PC/Deep Search – A search in Primo Central or another deep search index. This includes a blended deep search indexes (such as Primo Central and EBSCO).
    Resource Type Pre-filter
    An attribute field that stores the resource type pre-filter (for example, Books or Articles) selected by the user. The default is All Items.
    This attribute is available with the November 2015 release. Actions that predate this release will not have this attribute.
    Search Type
    An attribute field that stores the search type or operator that was selected by the user:
    • Keyword (default)
    • Exact
    • Starts with
    This attribute is available with the November 2015 release. Actions that predate this release will not have this attribute.
    Field searched
    An attribute field that stores the field being searched. This is relevant if the user performed a search on a specific field (such as authors only).
    User Group
    A search attribute field that indicates the user group of the user. The User Groups for Primo Analytics mapping table defines the user groups that display in the reports. A user's group is determined as follows:
    • If a user has signed in and belongs to a user group, the system will try to map the user group to one of eight user groups defined in the User Groups for Primo Analytics mapping table. If a match is not found, the Not Guest user group is used.
    • If a user has signed in and does not belong to a user group, the Not Guest user group is used.
    • If the user has not signed in, the Guest user group is used.
    This attribute has been added in the May 2016 release. Actions that predate the installation of this release will not have this attribute.

    Dates

    The Dates is a dimension table for different date ranges and format. The dates dimension can be used to limit reports to specific date ranges (such as year, month, week, and day).
    Dates Dimension Table

    Institutions

    The Institutions table is a dimension table with the following attributes: Primo Institution Code and Institution Name.
    Institutions Dimensions Table

    Primo Sessions

    Using the Primo Sessions subject area, you can create reports that help to answer the following types of business questions:
    • How many sessions are opened in a given time period?
    • On average how many users sign in within a session?
    • On average how many actions are taken within a session?
    • In which countries are users located when they open a session?
    The Primo Sessions subject area contains many fields used to create reports associated with Primo sessions. Refer to the following sections for more information on each field.
    Primo Sessions Subject Area

    Sessions

    The Sessions table is the fact table that stores information about sessions.
    Sessions Table
    The Sessions fact table has four measurement fields and one attribute fields:
    Sessions Fields
    Field Description
    Sessions
    The number of sessions.
    Session Duration
    The average session duration, which is counted from the first action to the last action within a session.
    Actions
    The number of actions within sessions.
    Signed-in
    A measurement field that tracks the number of times a user signed in within a session.
    On Campus
    A measurement field that tracks the number of times an action was taken from a user who was on campus (which is determined by the IP ranges configured for the Primo institution).
    This field is available with the November 2015 release.
    Primo View
    An attribute field that stores the View in which the action was done.
    The View has been added in the July 2015 release. Actions that predate the installation of this release will not have this attribute.

    Dates

    The Dates is a dimension table for different date ranges and format. The dates dimension can be used to limit reports to specific date ranges (such as year, month, week, and day).

    User Country Location

    The User Country Location is a dimension table for information about the location of end-users when they start sessions.
    Zero Result Searches Subject Area
    The User Country Location dimension has the following attributes:
    User Country Location Fields
    Field Description
    Country
    The country name, which is based on the end user’s IP.
    Country Code
    The country code, which is based on the ISO 3166-1 standard.
    Latitude
    The latitude of the country.
    Longitude
    The longitude of the country.

    Institutions

    The Institutions table is a dimension table with the following attributes: Primo Institution Code and Institution Name.
    Institutions Dimensions Table

    Primo PNX Records

    Using the Primo PNX subject area, you can create reports that help to answer the following types of business questions:
    • How many PNX records do I have from every data source, and how many records are added over time?
    • How many dedup and FRBR groups are there?
    The Primo PNX Records subject area contains many fields used to create reports associated with PNX records. Refer to the following sections for more information on each field.
    Primo PNX Records Subject Area

    PNX Records

    The PNX Record table is the fact table that stores information about PNX records.
    PNX Records Fields
    The PNX Records fact table has four measurement fields and one attribute fields:
    PNX Record Fields
    Field Description
    Records
    The number of records.
    FRBR Groups
    The number of FRBR groups.
    Dedup Groups
    The number of dedup groups.
    Data source
    The data source to which the records belong.

    Dates

    The Dates is a dimension table for different date ranges and format. The dates dimension can be used to limit reports to specific date ranges (such as year, month, and week). The information is a snapshot of the database for the given time frame.

    Institutions

    The Institutions table is a dimension table with the following attributes: Primo Institution Code and Institution Name.
    Institutions Dimensions Table

    Primo Pipes

    Using the Primo Pipes subject area, you can create reports that help to answer the following types of business questions:
    • On average how many records are processed by pipes?
    • On average what is the pipe duration?
      The Primo Pipes subject area contains many fields used to create reports associated with pipes. Refer to the following sections for more information on each field.
      Primo Pipes Subject Area

      Pipes

      The Pipes table is the fact table that stores information about pipes. Currently, all pipe runs can be included. In the future this will be limited to a year.
      Pipes Table
      The following table lists the fields provided in the Pipes fact table:
      Pipes Fields
      Field Description
      Records
      The number of records processed by the pipe.
      Duration
      The duration of the pipe in seconds.
      Jobid
      The Job ID of the pipe.
      Pipe Name
      The pipe name.
      Stage
      The final stage of the pipe.
      Status
      The status of the final stage of the pipe.
      Start Date
      The start date of the pipe.
      Start Time
      The start time of the pipe, which includes the date and time in the following format: HH:MM
      End Date
      The end date of the pipe.
      End Time
      The end time of the pipe, which includes the date and time in the following format: HH:MM
      Total Time
      The total time of the pipe, which includes the date and time in the following format: HH:MM

       

      Dates

      The Dates is a dimension table for different date ranges and format. The dates dimension can be used to limit reports to specific date ranges (such as year, month, and week).

      Institutions

      The Institutions table is a dimension table with the following attributes: Primo Institution Code and Institution Name.
      Institutions Dimensions Table

    Primo Device Usage

    Using the Primo Device Usage subject area, you can create reports that show the number of actions and sessions that are processed for each device type (including the operating system and browser type). For example:
    DeviceUsageExample.png
    The Primo Device Usage subject area contains many fields used to create reports associated with device usage. Refer to the following sections for more information on each field.
     DeviceUsageSA.png
    Primo Device Usage Subject Area

    Device Usage

    The Device Usage table is the fact table that stores information about device usage.
    DeviceUsageTable2.png
    Device Usage Table
    The Device Usage fact table has two measurement fields and several attribute fields:
    Device Usage Fields
    Field Description
    Sessions
    The number of times in which a type of device was used.
    Actions
    The number of actions for a device type.
    Signed-in
    A measurement field that tracks the number of times a user signed in when using a type of device.
    On Campus
    A measurement field that tracks the number of times a user was on campus when using a type of device.
    Browser Type
    An attribute field that stores the type of browser.
    Device
    An attribute field that stores the type of device.
    Operating System
    An attribute field that stores the type of operating system. It allows you to merge different versions of the same operating system into a single value.
    Primo View
    An attribute field that stores the View in which the device was used.

    Dates

    The Dates is a dimension table for different date ranges and format. The dates dimension can be used to limit reports to specific date ranges (such as year, month, and week).

    Institutions

    The Institutions table is a dimension table with the following attributes: Primo Institution Code and Institution Name.
    Institutions Dimensions Table
    • Was this article helpful?