System Startup and Shutdown Commands
This information is not applicable to Primo VE environments. For more details on Primo VE configuration, see Primo VE.
The following table lists the aliases and scripts that are used to start up or shut down the various servers (such as the Back Office and Front End servers) used with Primo:
| Alias/Script | Description |
|---|---|
|
be_start
|
Starts the Back Office (BO) server.
|
|
be_stop
|
Stops the BO.
|
|
be_restart
|
Stops and starts the BO server.
|
|
fe_start
|
Starts the Front End (FE) server. Note that the FE servers must be up and running before you can start the SE servers.
|
|
fe_stop
|
Stops the FE server.
|
|
fe_restart
|
Stops and starts the FE server.
Because this command may restart your server before it has finished shutting down, Ex Libris recommends using the following commands to restart the FE:
fe_stop fe_start |
|
se_start
|
Starts the Search Engine (SE) server.
|
|
se_stop
|
Stops the SE server.
|
|
se_restart
|
Stops and starts the SE server.
The FE servers must be up and running before you can start the SE servers.
|
|
start_apache
|
Starts the PDS Apache server.
|
|
stop_apache
|
Stops the PDS Apache server.
|
|
wd_start
|
Starts the Watchdog monitor.
|
|
wd_stop
|
Stops the Watchdog monitor.
|
|
$primoe_root/primo_startup_all
|
Starts the general Primo startup script.
|
|
$primoe_root/primo_shutdown_all
|
Starts the general Primo shutdown script.
|