Skip to main content
ExLibris
  • Subscribe by RSS
  • Ex Libris Knowledge Center

    SA: Error when updating IP ranges in Access Control groups

    • Article Type: General
    • Product: Voyager
    • Product Version: 6.1

    Problem Symptoms:
    ? Multiple IP ranges cannot be added to System Administration > System > Access Control Groups without saving after each range is entered.
    ? When adding a second range the following error occurs: "IP Address Range is overlapping with an existing range: xxx.xxx.xxx.xxx"

    Cause:
    This behavior is the result of known issue: VYG-4126

    Resolution:
    This issue has been resolved for Voyager 9.0.0 and above.

    Additional Information

    Replication steps:
    1. Navigate to SysAdmin > System > Access Control Groups
    3. Click on 'IP Range' for 'Main Lib', and click 'Edit'
    4. Click 'IP Range' tab
    5. Add a new range (e.g. Minimum = 131.170.0.0, Maximum = 131.170.255.255), click OK.
    6. Add another new range (e.g. Minimum = 144.205.0.0, Maximum = 144.205.255.255), click OK.
    7. Error received: "IP Address Range is overlapping with an existing range: xxx.xxx.xxx.xxx"

    Workaround: Save between entering each range.

    Category: System Admin


    • Article last edited: 3/18/2014