Skip to main content
ExLibris
  • Subscribe by RSS
    • Back
    Aleph
    Ex Libris Knowledge Center

    Upgrade Express v18-v19: Other things need to be done before step 1016

    1. Last updated
    2. Save as PDF
    • Article Type: General
    • Product: Aleph
    • Product Version: 19.01

    Description:
    I've had problems with the Z127 triggers every time I've done the v18-v19 upgrade.

    Resolution:
    [From Al Rhykhus, Minnesota PALS consortium:]

    I finally figured out the correct order to do things. Step 1016 should not be run until after at least p_union_01 has been run in the XXX30 libraries. You can also re-index and run p_union_02 before running the step. I finally was able to accomplish and upgrade without errors by doing this.

    So the correct way to run the upgrade:

    1. Run upgrade express on all steps above 999 except step 1016.
    2. Reindex the XXX30 libraries, include running p_union_01 and p_union_02
    3. Run step 1016 in the upgrade express.
    4. Run csh -f $aleph_proc/create_z127 and csh -f $aleph_proc/load_z127_to_mem in each of the XXX30 libraries.

    [Note: You need to be dlib-ed to the xxx30 library when running create_z127 and load_z127_to_mem.]

    See also KB 16384-3649.

    • Article last edited: 10/8/2013