Skip to main content
  • Subscribe by RSS
  • Ex Libris Knowledge Center

    Primo Port Configurations

    This information is not applicable to Primo VE environments. For more details on Primo VE configuration, see Primo VE.
    The default HTTP ports for Primo’s Back Office (BO), Front End (FE), and PDS are 160y, 170y, and 899y, respectively (where y is the copy number, starting with 1). The default HTTPS port (Secure HTTP) for PDS is 1443.
    The non-standard nature of these defaults can present a barrier to use. To overcome this barrier, these ports should not be changed and access to them should not be blocked. Instead, the standard ports (such as 80 for HTTP and 443 for HTTPS) should be redirected or translated to Primo’s default ports.
    The use of mod_jk to redirect the port to port 80 is not recommended or supported by Ex Libris Support.
    This section includes:
    • Was this article helpful?