Skip to main content
  • Subscribe by RSS
  • Ex Libris Knowledge Center

    LincPlus: "Error: Could not connect on C1601"

    • Article Type: General
    • Product: Aleph
    • Product Version: 16.02

    Our bindery staff are currently receiving the following error message while trying to connect to the ExLibris server checking books in or checking books out via the LincPlus software):

    Error: Could not connect on C1601

    Check these values:.

    1) $alephe/tab/license has:.

    2) $alephe/tab/tab_version should have this line:
    no_ver ALEPH Y 0.

    3) pc_server_defaults enable either an item process status change (to SB) or a loan:.
    setenv ext_bind_process_status SB.
    setenv ext_perform_loan N.
    setenv ext_default_return_hour 2359.
    setenv ext_bind_ref_no_1 LCNum,010,a.
    setenv ext_bind_ref_no_2 ISBN,020,a.
    setenv ext_bind_ref_no_3 ISSN,022,a.

    4) Setup on (LINCPlus) client:
    Host name: [example]
    Port#: 6525 [pc_port].
    Library Name: xxx50 [ADM library].
    User Name: BINDER [see more below].
    Server password: BINDER.
    Bindery Account: ICI [see more below].
    Server Version: no_ver

    6) Data in xxx50:.
    user (ADMIN) BINDER/BINDER [for example] has privileges in ADM library;.
    user (CIRC) ICI [for example] has local privileges for loan, in case of loan;.
    barcode (e.g. 888-10) is ready for testing.

    Note: In this particular case, it was the lack of the tab_version line (see #2 above) which caused error.

    Additional Information

    bind, LincPlus

    • Article last edited: 10/8/2013