Skip to main content
  • Subscribe by RSS
  • Ex Libris Knowledge Center

    Logging into Aleph via PDS

    • Article Type: General
    • Product: Aleph
    • Product Version: 17.01

    Cannot connect to ALEPH via PDS, what should I check?

    You can check the following:

    1. In ALEPH, the USER-SHARING in tab100 must be set to Y.
    This is mandatory for PDS to work before v18.
    Please use USER-SHARING=Y in tab100 of the ADM library.

    2. In v17, the XXX50/tab/tab100 : PDS-KEY-TYPE can handle only one type at a time.
    To login to ALEPH, type "00" should be used.

    3. In alephe/tab/tab100, PDS-AWARE must be set to Y.

    • Article last edited: 10/8/2013