Skip to main content
ExLibris
  • Subscribe by RSS
  • Ex Libris Knowledge Center

    Service 'Anonymizing Z36H and Z37H (elib-50)' doesn't work

    • Article Type: Q&A
    • Product: Aleph
    • Product Version: 20

    Question

    How can you find out, that service elib-50 worked correctly?

    $alephe_scratch/xxx50_p_elib_50.nnnn

    ALEPH/LINUX, Copyright Ex Libris.
    version 18 revision 01 copy 1, 28-Feb-2006
    start RIK50,090,Y,03,N,A,
    procedure=p_elib_50
    Fixed param: XXX50,090,Y,03,N,A,
    setenv p_active_library "XXX50"
    setenv p_days_since "090"
    setenv p_bor_status_yes_no "Y"
    setenv p_bor_status_filter "03"
    setenv p_transform "N"
    setenv p_what "A"

    […]

    Load: /exlibris/aleph/u18_1/alephe/tab/tab100
    Load: /exlibris/aleph/u18_1/rik50/tab/tab100
    1 START READING Z36H AT 16:37:46
    502 READING ID 350718-2107X AT 16:37:47

    […]

    241483 READING ID PID000034458 AT 16:38:20
    241691 END READING Z36H AT 16:38:20
    241691 START READING Z37H AT 16:38:20
    242692 READING ID 650202-1907X AT 16:38:34

    […]

    428878 READING ID PID000032895 AT 17:05:27
    429240 END READING Z37H AT 17:05:30
    end

    Answer

    When the service is run correctly, the z36h_id or z37h_id (depending on the filter), is set to 'DUMMY' thus braking the link to the patron record.

    Example:

    s+ xxx50
    select count(*) from z36h
    where z36h_id ='DUMMY';

    Category: Circulation (500)

    Subject: Services


    • Article last edited: 10/8/2013