p_file_20: 0504 error adding z308 type 00
- Article Type: General
- Product: Aleph
- Product Version: 18.01
Description:
Getting lots of errors while trying to run our PLIF updates:
System is adding z308 type 00.
Error (b_file_20_chk_edit_record) : Errors in Z308 Record 000001
Number of Errors = 01
Error 0504 : Z308-VERIFICATION can not be empty when TAB-BOR-ID-VER-NEEDED is "Y"
System is adding z308 type 00.
Error (b_file_20_chk_edit_record) : Errors in Z308 Record 000002
Number of Errors = 01
Error 0504 : Z308-VERIFICATION can not be empty when TAB-BOR-ID-VER-NEEDED is "Y"
Etc.
Resolution:
As noted in KB 16384-3267, for the type 00, the generation of the z308_verification in b_file_20_merge_z308 occurs only when the TAB100-DEFAULT-BOR-VERIFY-1 is set to "Y" (or "K").... "N" does not generate a z308_verification.
The abc50 tab100 has: DEFAULT-BOR-VERIFY-1=N.
If you want it to use the util g/2 last-bor-verify-1 value, specify "Y".
If you want it to use the z308-key-data -- as it was previous to v18 rc 1575, specify "K".
"K" is the simplest. Change the abc50 tab100
DEFAULT-BOR-VERIFY-1=N
to:
DEFAULT-BOR-VERIFY-1=K
Note: If the error occurs for a type 01 (barcode) rather than a 00, see KB 16384-18626.
- Article last edited: 10/8/2013