Skip to main content
ExLibris
  • Subscribe by RSS
  • Ex Libris Knowledge Center

    Configuring Hypertext Link Definitions for Primo VE

    Return to menu

    Primo VE allows you define which display fields permit hypertext linking in the Details section of the record's full display. To use this functionality, the search fields must be configured for Advanced Search. For more information, see Configuring Advanced Searches.

    PVE_HypertextLinking.png

    Hypertext Links on Full Display Page

    If the display field contains the $$Q subfield in Primo VE's normalized record, the system will perform an advanced search using the contents of the $$Q subfield instead of the display text when a user clicks the display field's hypertext link.

    <creator>Fitzgerald-Jones, Sandra 1938- interviewer$$QFitzgerald-Jones, Sandra</creator>

     
    To configure a new display label:
    1. Open the Hypertext Linking Definitions page (Configuration Menu > Discovery > Display Configuration > Hypertext Linking Definitions).

      PVE_HypertextLinkingDefinitionsPage.png

      Hypertext Linking Definitions Page
    2. Add a display field:

      1. Select Add Row to open the dialog box.

      2. Specify the following information for the display field.

        • Display Field – The display field for which you want to enable hypertext linking.

        • Search Index – Indicates which search field the system should search when the link is selected by the user. If you specify Any, the system will check all search fields for a match. To use this functionality, the search fields must be configured for Advanced Search. For more information, see Configuring Advanced Searches.

        • Search Operator – Indicates whether the display field's search information must exactly match (exact) or partially match (contains) the contents of the record's search field.

        • Context Field – Indicates whether the search is relevant to ANY (all scopes) or L (local scopes only) scopes.

      3. Select Add Row in the dialog box to save the new display field.

    3. Make sure that the Enabled field is active for the new display field.

    4. Select Save or Customize (first time only).

    • Was this article helpful?