Skip to main content
  • Subscribe by RSS
  • Ex Libris Knowledge Center

    SP 3632 not updating module that was opened

    • Article Type: General
    • Product: Aleph
    • Product Version: 20

    I've installed SP 3632 on our development server. When I open up a module that is still on SP 3389, I get a list of files that need to be updated so I click update all. The module does not close and prompt for login again. Once manually closed, when I log in again, the module has not been updated. If I switch to a different module and run Version Check again, the first module updates, but the second one still does not close and prompt for a login.

    Is there another problem with the VerUtil.exe? I have the one from September that we're using. Is there a problem with that one and SP 3632?

    I suggest that you do this:

    * Save the .\Alephcom\bin\verutil.exe on your pc as "verutil.exe.beforetest"

    * ftp the /exlibris/aleph/a20_1/aleph/pc_exe/sp_exe/alephcom/bin/verutil.exe from your server to the \Alephcom\bin\ directory on your pc.

    * Compare the date and size of the .\Alephcom\bin\verutil.exe.beforetest to the verutil.exe you just ftp-ed.

    If the size or date is different, then start your client and see if you see different behavior.
    If the size and date are the same, let me know and we will proceed from there.

    [From site:] Thank you - we had an old version of the VerUtil.exe in our most recent build. This may be closed

    • Article last edited: 10/8/2013