Skip to main content
  • Subscribe by RSS
  • Ex Libris Knowledge Center

    User Authentication: Administration Console -- Authentication Settings -- Add IP Address

    • Product: 360 Core Client Center

    How do I add a new IP address or range that will be used to identify users (patrons) from my library network as authenticated users of Serials Solutions' services?

    This page is part of a larger set of documentationabout using the Administration Console to configure your User Authentication service.

    You can add a new IP address or range in the Add IP Address section of the User Authentication Settings page.
    Your IT department will most likely be able to provide you with your institution's IP addresses.
    From the IP Address page, click Edit in the upper-right corner and then click Add New IP Address/Range. You'll see the following page:
    User Authentication - Admin Console - Add IP Address
    If you are adding a single IP address, enter it in the Beginning IP Address field and leave the Ending IP Address field blank.
    If you are adding a range of IP addresses, enter the first IP address of the range in the Beginning IP Address field and the last IP address of the range in the Ending IP Address field.
    The system does not support wildcards, such as an asterisk (*), so the IP range 215.222.0.0 to 215.222.255.255 cannot be entered as 215.222.*
    If you are adding a single IP address or IP range, click Save to save your changes. If you will be adding more IP addresses or IP ranges, click Save & Add Another. Click Cancel if you decide not to add that IP address or range.
    Unless you clicked Save & Add Another, you will return to the IP Address page.

    • Date Created: 9-Feb-2014
    • Last Edited Date: 21-Feb-2014
    • Old Article Number: 8951