Skip to main content
  • Subscribe by RSS
  • Ex Libris Knowledge Center

    ANA: Type in Values does not work with Cataloging Package MFHD Location filters

    • Article Type: General
    • Product: Voyager
    • Product Version: 8.2.0

    Problem Symptoms:
    Filtering with Type in Values causes ?no data available? or Parsing error for MFHD Location and MFHD Location Display Name in Cataloging package.

    This behavior is the result of Issue16384-21969 / VYG-4646.

    VYG-4646 is resolved in Voyager 9.0.0 and higher.

    Additional Information

    Replication steps:
    1. Open Query Studio > Package: Cataloging 8.2.0
    2. Click +Presentation Layer
    3. Click +Bib Record
    4. Bib ID -> Insert
    5. Click +MFHD Record
    6. MFHD Location Code -> Insert
    7. Note one of the codes from the unfiltered list, such as ?main? depending on site.
    8. Highlight MFHD Location Code -> Filter
    9. Click Type in Values
    10. Operation: Starts with
    11. Type in the first few characters of the code noted in step 7.
    12. OK
    13. Result: no data available.
    14. Back button
    15. Highlight MFHD Location Code -> Filter
    16. Click Type in Values
    17. Operation: Exactly Matches
    18. Type in whole code noted in step 9
    19. Insert the code into ?Condition: show only the following? box
    20. OK
    21. Result: Parsing error before or near position: 64 of: "[Presentation Layer].[MFHD Record].[MFHD Location ID] in ([code])"

    Workaround: Do not filter with Type in Values (use Pick Values from a List).

    Other information: Similar results occur when filtering on MFHD Location Display Name instead of Code.

    Category: Cognos

    • Article last edited: 3/18/2014
    • Was this article helpful?