Closing/Cancelling, Reopening, and Relinking PO Lines

Last updated
Save as PDF
Share
1. Share
2. Tweet
3. Share

This page describes how to close, cancel and delete PO lines, as well as how to reopen and relink/reactivate them. It includes information on changing a PO line's bibliographic reference. For a high level overview of the receiving stage for physical items with links to details for closing PO lines, post receiving and processing claims see Receiving Material. For information on the overall purchasing workflow see Purchasing Workflow. For an overview of working with acquisitions in Alma, including links to relevant sections such as Invoicing, Renewals, Configuration, etc., see Introduction to Acquisitions.

The following sections describe certain actions that you can perform on PO lines from the PO Lines task list (Acquisitions > Purchase Order Lines > All PO Lines; see Communicating with Vendors), to either remove them from active processing, return them to active processing, or change the resources they relate to. Depending on your role, the status of the PO line, the type of PO line, and other factors, you may or may not be able to perform all of these actions on all PO lines in your system. For more information about task lists in general, see Record Lists.

In order to perform any of these actions on a PO line, the PO line must be assigned to you; see Editing PO Line Information.

Closing, Canceling, and Deleting PO Lines

The table below compares the actions of closing, canceling, and deleting PO lines.

End-of-cycle PO Lines
Action	Reason	Available for	Result
Closing PO Lines	To complete the PO	One-time PO lines waiting for invoice payment Continuous PO lines with recurring renewal	PO line stored as closed; can be reopened
Cancelling PO Lines	Error during PO line processing	Active PO lines that are not being evaluated or waiting for invoice payment	PO line stored as cancelled, can be reopened
Deleting PO Lines	Clean up system	Canceled PO lines Users with Extended roles	PO line and all related material deleted from Alma

Closing PO Lines

Closing a PO line is used to indicate that the purchase was completed. The following types of PO lines can be closed:

One-time PO lines that have been sent (with at least one received or activated resource) and are waiting for invoice payment (these are usually automatically paid, set to Fully Invoiced, and/or closed by the workflow)
Continuous PO lines with recurring renewal (when a serial subscription must be stopped, for example)

When closing PO lines, inventory is not deleted. For PO lines associated with electronic resources, a task is added to the Electronic Activation task list with the following note: The order for this resource was closed. Please check whether deactivation is required.

When closing PO lines, encumbrances are released.

Notes and attachments can be added to a PO line even when it is closed.

To close a PO line:

In the PO Lines task list, in the row actions of the PO line, select Close, and then select Confirm in the confirmation dialog box.

To close a PO line with some received and some unreceived items, remove the unreceived items, change the number of items in the PO line, and then re-receive the received items.

Cancelling PO Lines

Cancelling a PO line invalidates the PO line. You can cancel any active PO line, except ones being evaluated or waiting for invoice payment. Cancelled PO lines can be deleted.

When a PO line is cancelled, it is not removed from Alma. Cancelled PO lines are still included in the PO Lines task list, and you can edit or delete notes and attachments in cancelled PO lines (see Editing PO Line Information). If a cancelled PO line has an e-task associated with it, the e-task is deleted. A PO line’s encumbrances are released when it is cancelled.

If the PO line is a main PO line, Alma attempts to delete the PO line’s inventory. Alma does not delete the inventory if the PO line is an additional PO line or if the inventory has been received or activated. If the inventory cannot be deleted, the link between the PO line and its inventory is removed.

Alma attempts to delete both the item and, if the holdings is then empty, it attempts to delete its holdings as well. If the bibliographic record is then also itemless, the handling of the record depends on the value of the pol_handle_bib_record_without_inventory customer parameter. For more information, see Configuring Other Settings (Acquisitions).

If a PO line associated with a request is cancelled, the Requests - Recalculate After Inventory Update job detaches the request from the associated inventory and potentially cancels the request (if no other items can be used for fulfilling the request). For details, see the job Requests – Recalculate after Inventory Update in Viewing Scheduled Jobs.

To cancel a PO line:

In the PO Lines task list, in the row actions of the PO line, select Cancel Line. If you have configured a PO line cancellation restriction note, it appears. After you confirm, or if you do not have a note configured, after you select Cancel Line, the Cancellation Information dialog box appears.

Cancellation Information Dialog Box
Select the Cancellation reason. To configure the available reasons, see Configuring PO Line Cancellation Reasons.
In Cancellation note, enter a note for the vendor, as needed.
The note details appear in the Notes section of the PO line Details pane.
Select Send cancellation to vendor to send a cancellation notification to the vendor, as required.
Cancellation is sent by email unless the vendor is configured for EDI cancellations, in which case cancellation is sent using EDI. If sent by email, the preferred address defined for the vendor is used. For information about EDI, see Electronic Data Interchange (EDI).
If the pol_handle_bib_record_without_inventory customer parameter is set to MANUAL, an additional field, Handling bibliographic records without inventory, appears in the dialog box (see Configuring Other Settings (Acquisitions). In this case, you must specify what should be done with the bibliographic record if cancelling this PO line causes it to become itemless. To do so, select one of the following options from the dropdown list:
- Do nothing – Leave the bibliographic record in the database.
- Delete bibliographic records – Delete the bibliographic record from the database.
- Suppress bibliographic records – Leave the bibliographic record in the database, but suppress it from publishing in discovery.
Select Confirm. The PO line is cancelled. If Send cancellation to vendor was selected, the cancellation instruction is sent to the vendor.
A cancellation instruction is sent to the vendor only if the order was previously sent to the vendor. If the order is still in review, no order was sent to the vendor, and it is therefore not necessary to select Send cancellation to vendor.

To find cancelled PO lines:

In the PO Lines task list, in the facets, under Workflow Step, select Cancelled. The task list is filtered, and only those PO lines that are cancelled appear in it.

Deleting PO Lines

You can delete a PO line only if you have the Purchasing Operator Extended role.

Deleting a PO line removes it from Alma and deletes any transactions associated with the PO line. Deleting a main PO line also deletes inventory resources associated with the PO line; deleting an additional PO line does not delete the inventory.

The Delete option is available for PO lines with the following statuses:

In Review
Packaging (Automatic or Manual)
Deferred or Cancelled

A PO line cannot be deleted if:

It is linked to an invoice line.
It is attached to a PO and has been sent to a vendor. (If the PO has not been sent, the PO line can be removed from the PO and then deleted.)
It is a main PO line and one of the PO line resources was received or activated (even if the PO line is in review).

Once a PO line is deleted, it cannot be retrieved or reopened. If there is a chance you will want to view or reuse a PO line, consider cancelling it (see Cancelling PO Lines, above) or closing it (see Closing PO Lines, above).

To delete a PO line:

In the PO Lines task list, in the row actions of the PO line, select Delete, and then select Confirm in the confirmation dialog box. The PO line is deleted.

For additional information about deleting PO lines, see Deleting POs.

Relinking and Reactivating PO Lines

The table below compares the actions of relinking, changing bibliographic references, and reopening PO lines.

Relinking and Reopening PO Lines
Action	Reason	Available For	Not Available For	Result
Relinking PO Lines	Better bibliographic record exists	PO lines with the status In Review, Deferred, Ready, or one-time Closed	Records from the Community Zone Items with two different bibliographic records	PO line is linked to the better record and its items/holdings are moved under that bibliographic record
Changing Bibliographic Reference	Better description for record exists	Active PO lines	Canceled PO lines	The PO line assumes a better, more complete description
Reopening a Closed or Cancelled PO Line	To open a PO line that was closed or cancelled (often by mistake)	Closed or cancelled PO lines	All other PO lines, including deleted PO lines	Status changes to In Review

Relinking PO Lines

You can change the bibliographic record to which a PO line is linked. Possible reasons for doing this include:

An EOD arrives for a single volume within a multi-volume work which is more suitable to link to than the existing link.
An item arrives that matches an existing bibliographic record more suitably than a new one imported at the time of the order.

The Relink option is available for PO lines with the status In Review, Deferred, Ready (packed into a PO and ready to be sent), or Waiting for Manual Renewal, as well as for unsent one-time closed PO lines. PO lines cannot be relinked if any of the following is true:

The PO line is related to the Central Knowledge Base (PO line is an electronic collection). When this occurs, the Relink option does not appear.
The PO line does not have an MMS_ID.
The PO line contains items belonging to two different bibliographic records.

To relink a PO line:

Select Relink in the row actions list of the PO line you want to relink.
Select Confirm in the confirmation dialog box. A Repository Search page opens in a sliding panel, with search results for a search for resources similar to the PO line (for instance, resources that have the same Title and ISBN, if they exist).
Modify the search as required (see Searching for PO Lines).
Select the button beside the number of the new resource, and then select Select. The PO line is linked to the new resource. Additionally, the associated holdings and items are also moved to the new bibliographic record.

Changing a PO Line's Bibliographic Reference

It is possible to change the bibliographic record reference of a PO line to a different bibliographic record without changing the inventory. Only the PO line description is changed.

This functionality is useful, for example, if an order is made on a short (stub) bibliographic record. In this case, the PO line description is the description of the short bibliographic record. If the short bibliographic record gets updated with a full bibliographic record, the PO line will still have the now inaccurate old description of the title. In a case such as this, you can select Change Bib Reference to update the PO line description to the description of the new version of the record.

This feature is relevant only for title-based PO lines. In addition, it cannot be performed on cancelled PO lines.
PO lines of type Electronic Collection-Subscription are treated the same as Other Services - Subscription.

To change the bibliographic record to which a PO line is linked without moving the inventory:

Select Change Bib Reference in the row actions list of the PO line for which you want to change the reference.

Purchase Order Lines List
Select Confirm in the confirmation dialog box.
A Repository Search page opens in a sliding panel, with search results for a search for resources similar to the PO line (for instance, resources that have the same Title and ISBN, if they exist).
Modify the search as required (see Searching for PO Lines).
Select the button beside the number of the new resource, and then select Select. The PO line's reference is changed.

Reopening a Closed or Cancelled PO Line

To reopen closed or cancelled PO lines, you must have one of the following roles:

Purchasing Operator
Purchasing Manager

PO lines that have been closed or cancelled can be reopened and reused. When a closed PO line is reopened, the PO is removed and the PO line is updated with a status of In Review. When a cancelled PO line is reopened, the original fund is removed; you must add a new fund to the PO line.

Closed PO lines have completed a full acquisitions workflow (order and payment) and, on completion, have been closed. Cancelled PO lines have been started but not completed.

Closed or cancelled PO lines can be reopened from the individual PO line or by using an automated process.

To reopen a closed or cancelled PO line from the PO line:

Select Reopen in the row actions list of the PO line you want to reopen, and then, in the confirmation message, select Confirm. The PO line status is changed to In Review.

To reopen closed or cancelled PO lines in bulk:

Run the Update PO Lines Workflow job. For more information, see Running Manual Jobs on Defined Sets.